EVGA Z270 Classified – K (134-KS-E279)
- 83 -
Repairing an array within IRST
This section of the guide will illustrate how to repair a degraded array from within the
IRST. For purposes of this guide, we are repairing a degraded RAID 1 array using a
third drive plugged into the controller, but not currently in use.
Below, you can see a degraded array, and one of its drives reported as missing/failed.
The data on the other drive is still intact, but the fault tolerance is offline due to the
missing/failed drive. The IRST also shows several warnings, the "!" for "Status," a "!"
for the portion of the array missing (showing the degradation of the logical drive), and
the "!" for the physical drive, which also states 0GB – a further indicator of a faulty
drive.
You can repair the array from here or from the Manage tab at the top of IRST.
