EVGA PC-over-IP Administrative Interface Скачать руководство пользователя страница 33

Страница: 33 / 108

PC-over-IP Administrative

Interface User Manual

1.6.9

OSD

The

OSD

webpage allows the administrator to modify the On Screen Display (OSD)

parameters.

This option is only available on a Portal; on the Host it is disabled and non-editable.

Note: The Portal OSD parameters can also be configured using the Portal OSD. See
Section 2.3.9 OSD.

Figure 1-17: OSD Configuration Webpage

1.6.9.1 Screen-Saver Message

The

Screen-Saver Message

field allows the administrator to change the OSD screen-

saver text. The text can be up to 240 characters.

The screen-saver is a simple black screen with the screen-saver text jumping randomly.

1.6.9.2 Screen-Saver Timeout

The

Screen-Saver Timeout

field allows the administrator to configure the screen-saver

timeout. The timeout can be configured in seconds, up to 9999 seconds. A setting of 0
seconds disables the screen-saver.

1.6.10

Image

The

Image

webpage allows the administrator to adjust the image (graphics) quality of the

PCoIP session.

This option is only available on a Portal; on the Host it is disabled and non-editable.

Содержание PC-over-IP Administrative Interface













































































































Результаты поиска

Содержание PC-over-IP Administrative Interface

Отзывы:

Похожие инструкции для PC-over-IP Administrative Interface

Бренды по названию

Популярные бренды

EVGA PC-over-IP Administrative Interface, Руководство пользователя

Результаты поиска

Содержание PC-over-IP Administrative Interface

Отзывы:

Похожие инструкции для PC-over-IP Administrative Interface

Бренды по названию

Популярные бренды