evertz hd9084 Скачать руководство пользователя

Страница: 57 / 126

HD9084 HDTV Caption Encoder Manual

OPERATION

Page 3-27

Characters

•

Supports parsing the entire code space as specified in section 7 of the

standard, but due to font limitations, the glyphs for the G0 and G1 code
spaces are not complete.

Windows

•

Support for the full eight windows.

•

Anchor points and relative positioning are supported.

Window
Attributes

•

No window priorities.

•

No overlapping windows.

•

Only LEFT justification is supported.

•

Only LEFT_TO_RIGHT print direction.

•

Only TOP_TO_BOTTOM scroll direction.

•

No word-wrapping support.

•

No display effects

•

Support for fill colour and opacity of up to 4 simultaneous windows.

•

No borders.

Pen Attributes

•

Only STANDARD pen size is supported.

•

Only DEFAULT font style is supported.

•

No text tag support.

•

No offset (super-, and sub-script) support.

•

Italics is supported.

•

Underline is supported.

•

No edge type support.

Pen Colours

•

Foreground and background colours and opacities are supported for up to 4
simultaneous pens.

Table 3-2: CEA-708 Decoder Specifications and Limitations

3.5.5.

PVR Data Block

The PVR Data Block feature allows the user to block out PVR data control packets  “hidden” within
CEA-608 caption data.  The possible options include pass or block.  The default setting for this control
is pass.

USO

RESTRITO

Содержание hd9084































































































































Результаты поиска

Содержание hd9084

Отзывы:

Похожие инструкции для hd9084

Бренды по названию

Популярные бренды

evertz hd9084, Инструкция по эксплуатации

Результаты поиска

Содержание hd9084

Отзывы:

Похожие инструкции для hd9084

Бренды по названию

Популярные бренды