evertz hd9084, Инструкция по эксплуатации

Страница: 80 / 126

HD9084 HDTV Caption Encoder Manual
Page 4-6 SERIAL CONTROL PROTOCOL
Command: ^AI<sp>pn<sp>baud<sp>ws<sp>par<cr>
or ^AI<cr>
Default: none
The parameter baud specifies the baud rate that will be used. The permitted values of parameter baud
are shown in the table below.
Parameter Baud rate
12
1200
1200 1200
24 2400
2400 2400
48 4800
4800 4800
96 9600
9600 9600
192 19200
19200 19200
384 38400
576
57600
If the optional port name parameter is missing, then the current control port will be assumed.

If the baud rate of modem Port D/E is changed while the modem is in use, the new
baud rate will not take effect until the caller disconnects from the modem.
If no parameters are specified, the HD9084 will respond with a report of the communication parameters
of all the COMM ports as shown below.
Port A: 1200 7 Odd
Port B: 9600 8 None
Port C: 1200 7 Odd
Port D: 4800 8 None
Examples: ^AI<sp>19200<cr> Set baud rate to 19200.
^AI<sp>P1<sp>96<sp>8<sp>N Sets Port A to 9600,8,N.
USO
RESTRITO