HD9084 HDTV Caption Encoder Manual
Page 3-38
OPERATION
3.8.5.1.
IP Address Source
The IP Address SRC parameter defines the type of IP address used by the HD9084. Possible options
include either dynamic or static. The dynamic option should be used when a DHCP server will assign
the IP address of the HD9084. The static option should be used if a dedicated IP address will be
assigned to the HD9084. The default setting for this control is dynamic.
3.8.5.2.
Static Address
The Static Address parameter defines the unique IP address used by the HD9084 within the network.
192.168.1.XXX is an example of an IP address defined within a private (internal) network. Take care
not to define the same IP address for multiple devices that reside on the same network. To configure
this option, enter the NETWORK SETUP sub-menu and use the
UP
and
DOWN
arrows until STATIC
ADDRESS is displayed on the front panel. Press
SELECT
to enter this option and use the
UP
and
DOWN
arrows to configure the individual network address octets. Press
SELECT
to proceed to the
next octet. Press
SETUP
to exit this level.
3.8.5.3.
Static Netmask
The Static Netmask parameter defines the “subnet mask” of the network. Specifically, this parameter
outlines all the IP addresses that can communicate with the HD9084. To configure this option, enter
the NETWORK SETUP sub-menu and use the
UP
and
DOWN
arrows until STATIC NETMASK is
displayed on the front panel. Press
SELECT
to enter this option and use the
UP
and
DOWN
arrows to
configure the individual network address octets. Press
SELECT
to proceed to the next octet. Press
SETUP
to exit this level.
3.8.5.4.
Static Broadcast
The Static Broadcast parameter defines the broadcast address used by the HD9084. The broadcast
address is an IP address that allows information to be sent to all machines on a given subnet rather
than a specific machine. To configure this option, enter the NETWORK SETUP sub-menu and use the
UP
and
DOWN
arrows until STATIC BROADCAST is displayed on the front panel. Press
SELECT
to
enter this option and use the
UP
and
DOWN
arrows to configure the individual network address octets.
Press
SELECT
to proceed to the next octet. Press
SETUP
to exit this level.
3.8.5.5.
Static Gateway
The Static Gateway parameter defines the IP address of the gateway or “router” that resides on the
network. A gateway is used to connect 2 IP-based networks together. If data that is destined for the
HD9084 resides on a different network, then the IP address of the gateway must be defined. To
configure this option, enter the NETWORK SETUP sub-menu and use the
UP
and
DOWN
arrows until
STATIC GATEWAY is displayed on the front panel. Press
SELECT
to enter this option and use the
UP
and
DOWN
arrows to configure the individual network address octets. Press
SELECT
to proceed to
the next octet. Press
SETUP
to exit this level.
To communicate beyond the private (internal) network and into the internet, all
messages must be relayed via the gateway (firewall). As a result, the firewall
must be configured separately by the end-user to facilitate communication.
Consult your network administrator if establishing communication link beyond
the private network.
USO
RESTRITO
Содержание hd9084
