evertz CP-2116E, Руководство пользователя

Страница: 54 / 74

CP-2116E
Remote Control Panel
Page - 44
Revision 1.2
Figure 6-2: Create a MVP System
d. Once the user has filled out all the fields in the New System dialog box, select the Save
button.
e. Then select the Save button in the top right of the Systems screen.
f. The MVP system will be added to the list and a notification to restart the panel will
appear. In the very top right of every page is a link to “Restart Panel Software”. Select
this link and the panel software will take approximately three seconds to restart.
g. When the panel restarts, the system should be displayed on the front panel of the
CP-2116E.
4. Daily operation of the CP-2116e (Directly using the panel)
a. Select the MVP system from the CP2116E front panel by navigating to the appropriate
system using the shaft encoders and soft-keys.
b. Once the list is generated, select a display from the list and select OK.
c. The layout that is currently loaded will be displayed and a list of layouts that the user can
load will be provided. Select one of the layouts and then select the load button.
d. The user can also change sources on the CP-2116E. This will allow you to pick a source
that is already located on the MVP somewhere else, without making routes. The user
can select which audio to route to the monitor outputs. Furthermore, it will allow the user
the ability to view thumbnails generated in real-time from the VIP/VIPX/VIPA/MVP
attached to the system.