evertz CP-2116E, Руководство пользователя

Страница: 33 / 74

CP-2116E
Remote Control Panel
Revision 1.2
Page - 23
5.2.2.3. Template Properties
The user can adjust the template properties by entering the appropriate information into the fields
below:
•
#: Double-clicking a number in this column will highlight the corresponding parameter
in the
Service Template Parameter Tree .
•
Parameter: This field identifies the parameter name and will display the location of the
parameter in the parameter tree when double-clicked.
•
Label: This field displays the name that is shown on the LCD screen for each control
parameter. The user can customize the buttons by entering a new label into this
field.
•
Default: This field displays the default level for the selected parameter. The user can enter
the appropriate unit into this field.
•
Inc: Entering a number in this field will assign a number value that the encoder will
increment when it is rotated. For example, if this value is set to
2 , each time the
shaft encoder is turned (clicked over once) the value will increment by 2 instead
of a regular default unit of 1.
•
Fine Inc: Entering a number in this field will assign a fine increment value that will be used
when the shaft encoder is pushed. This value will then be used each time the
shaft encoder is turned (clicked over once).
•
Apply Type: This field enables the user to select an Apply Type . The user can select
“Pressed,” “Dynamic,” or “Cycle.”
•
Filters: This field displays the range of values and control options available for the
selected parameter. The user can change the minimum and maximum values
and the parameter options using this field.
5.2.2.4. Creating a New Service Template
To create a new template follow the procedure outlined below:
1. Navigate to the Service Templates control menu and click on the New Template button or
select the Create a New One link. A new screen, as illustrated in Figure 5-9 will open.
Figure 5-9: New Template Page