evertz CP-2116E Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 74

evertz CP-2116E Скачать руководство пользователя страница 4

INFORMATION TO USERS IN EUROPE

NOTE

This equipment with the CE marking complies with both the EMC Directive (2004/108/EC) and the Low
Voltage Directive (2006/95/EC) issued by the Commission of the European Community.

Compliance with these directives implies conformity to the following European standards:

•

EN60065

Product Safety

•

EN55103-1

Electromagnetic Interference Class A (Emission)

•

EN55103-2

Electromagnetic Susceptibility (Immunity)

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to the European Union EMC directive. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.

INFORMATION TO USERS IN THE U.S.A.

NOTE

FCC CLASS A DIGITAL DEVICE OR PERIPHERAL

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.

WARNING

Changes or modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment. Use of unshielded plugs or cables may cause radiation
interference. Properly shielded interface cables with the shield connected to the chassis ground of the
device must be used.

EN60065

Safety

EN504192 2005

Waste electrical products should not

be disposed of with household

waste. Contact your Local Authority

for recycling advice

EN55103-1: 1996

Emission

EN55103-2: 1996

Immunity

Evertz Microsystems Ltd

This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:

This device may cause harmful interference, and this device must
accept any interference received, including interference that may
cause undesired operation.

Tested to comply
with FCC
Standards

For Commercial Use

«
...
2
3
4
5
6
...
»

Содержание CP-2116E











































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды