evertz 3067VIP10G Series, Руководство пользователя

Страница: 41 / 46

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Revision 0.1
Page 33
Output Audio PID: This parameter allows the user to select which audio PID will be embedded by the
decoder into the video output, and can only be applied when Program Tuning Mode is set to PID
Select. Range for this value can be from 2 to 8190. When this setting is applied, if any of the selected
PIDS have been duplicated the user will be alerted with an ‘
error ’ message.

Note: 0, 1, and 8191 are reserved PIDS in MPEG so they are not included
within the value range.
Output Latency Mode: This parameter allows the user to set the latency on the Outputs to either
Standard, Medium, Low or Ultra Low modes.
6.6. MISC CONTROL
Figure 6-7: Misc Control
Protocol: This sets the UMD protocol to the following: Image Video, Philips ASCII, XY Integrator, tsl31.
Tsl40, and Harris Image Video.
Port : This parameter sets the UMD protocol port and can be set from 0 to 10000.
UMD Connected: This parameter verify the connection status for the UMD as either true or false.
NTP IP Address: This parameter sets the NTP server IP address.
NTP Time Value: This parameter verifies the NTP time value.