background image

1.

Repeat steps 5 to 6 of the Binding with Homesys section.

2.

Press and hold the Link button for 3 seconds until the LED flashes moderately (on
for 0.5 second; off for 0.5 second). This implies AC133 has now entered the
binding mode and is waiting to receive binding signals from the gateway.

3.

Within 5 seconds, the LED indicator then stop flashing and turn off, indicating the
learning procedure is completed. The screen below will appear indicating the
process is successful.

4.

If after 30 seconds LED flashes rapidly (on for 0.1 second; off for 0.1 second) for
3 times, it means the Wall Switch failed the binding process.

Reset to factory default 

To reset AC133 back to factory default state:

 

1.

Insert the batteries into the unit.

2.

Press and hold the link button for 3 seconds until the LED flashes moderately then

release the button.

3.

Within 30 seconds, press and hold the link button again, this time for more than 6

seconds until the LED turns off.

4.

Remove the batteries and re-insert them again. If the LED blinks repeatedly once

every 30 seconds this implies the device is reset back to factory mode.

Specifications 

Operating Temperature Range 

0°C - +40°C

 

Operating Humidity 

5 - 85% RH 

Battery Type 

AAA Battery x2 

Transmitting Range 

Indoor 30m; Outdoor >150m (Open space) 

Frequency Range 

868MHz (EU)/ 923MHz (America)

 

** Specifications are subject to change without notice

   

Warning: 

Do not dispose of electrical appliances as unsorted municipal waste, use separate 
collection facilities.   

Contact your local government for information regarding the collection systems 
available. 

If electrical appliances are disposed of in landfills or dumps, hazardous substances can 
leak into the groundwater and get into the food chain, damaging your health and 
well-being. 

When replacing old appliances with new ones, the retailer is legally obligated to take 
back your old appliance for disposal at least for free of charge. 

www.everspring.com 
3F., No. 50, Sec 1, Zhonghua Rd., Tucheng Dist., 
New Taipei City 23666, R.O.C 

A501112400R

 

Manual Binding 

Содержание AC133










Отзывы: