manualshive.com logo in svg

EverSewn Sparrow QE, Инструкция по эксплуатации, Страница: 8 / 48

Поделиться
Скачать
EverSewn Sparrow QE Скачать руководство пользователя страница 8

6

DANGER: To reduce the risk of electric 

shock.

CONNECTING THE MACHINE

Use of foot controller will permit control of start, stop and 

speed with your foot.

When the foot controller is connected, start/stop button will 

be deactivated. (See page 7)

1. 

Turn off the power switch. (Symbol 

O

)

2. Push foot controller plug into the jack on machine.

3. Place foot controller at your feet.

4. Turn on the power switch.

5. A lamp will light up when switch is turned on.

6. The harder you press the foot controller, the faster the 

machine will sew. The machine will stop when foot 

controller is released.

WARNING: To reduce the risk of burns, fire, 

electric shock, or injury to persons.

Tap Function

When you press and release the foot controller quickly, the 

needle position will be changed.

NOTE:

 Needle stop position will not be changed.

1. Place machine on stable table.   

2. Connect the power line cord to the machine by 

inserting the 2-hole plug into the terminal box.

3. Connect the power line plug to the electric outlet.

4. Turn on the power switch.

5. A lamp will light up when switch is turned on.

6. 

To disconnect, turn the power switch to the off 

position (Symbol 

O

), then remove plug from outlet. 

FOR UNITED STATES AND CANADA USERS:

POLARIZED PLUG INFORMATION

This sewing machine has a polarized plug (one blade wider than the other). To 

reduce the risk of electric shock, this plug is intended to fit in a polarized outlet 

only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still 

does not fit, contact a qualified electrician to install the proper outlet. Do not 

modify the plug in any way.

Never leave unattended when plugged in. Always 

unplug this machine from the electric outlet 

immediately after using and before maintenance.

WARNING: To reduce the risk of burns, 

fire, electric shock, or injury to persons.

Do not unplug by pulling on cord. To unplug, grasp the 

plug, not the cord. 

FOOT CONTROLLER

1. 

Turn off the power when connecting the foot controller to 

the machine.

2. Handle the foot controller with care and avoid dropping it 

on the floor. Be sure not to place anything on top of it.

3. Use only foot controller provided with this machine. (Type 

C-9001 manufactured by CHIEN HUNG TAIWAN Ltd))

Содержание Sparrow QE

















































Отзывы:

Нет отзывов