EverSewn Sparrow QE, Инструкция по эксплуатации, Страница: 15 / 48

13
You can sew tack stitch at the beginning and end of the
stitch by touching the tack/cut button. Also, you can cut
threads automatically after end tacking. See page 24.
Touching the width/length button, the display changes
as illustration (D).
When you select a pattern, stitch width and length are
set for suitable width and length automatically and
indicated on the screen. You can adjust them manually.
If the screen is indicating the thread tension, touch the
width/length button to indicate them.
To narrow the stitch width, touch the function button (a).
To widen the stitch width, touch the function button (b).
To shorten the stitch length, touch the function button (c).
To lengthen the stitch length, touch the function button (d).
* Preset stitch width and length are indicated as a
highlighted number.
* The beep sounds at the maximum or minimum value.
(The maximum or minimum value is different by each pattern. When
stitch width or length is not appeared, its pattern cannot change these
settings.)
When straight stitch patterns (1, 2, 4, 30) have been
selected, stitch width buttons change to adjust the
needle position.
To move the needle to the left, touch the function button
(e).
To move the needle to the right, touch the function
button (f).
Touching the tension button, the display changes as
illustration (F).
The thread is automatically setup to a suitable thread
tension. When you touch this button you can adjust it
manually. See page 15.
Number 0 - 3.5 - 7.0
Position Left Center Right
Pattern Tension
Width/
Length
Tack/
Cut
Pattern Tension
Width/
Length
Tack/
Cut
Pattern Tension
Width/
Length
Tack/
Cut
Stitch Width
Stitch Length
Pattern Tension
Width/
Length
Tack/
Cut
C. TACK/CUT BUTTON
D. ADJUSTING THE STITCH WIDTH AND
LENGTH
E. NEEDLE POSITION CONTROL
F. TENSION BUTTON
-
+
-
+
f
e
d
c
b
a