EverSewn Sparrow QE, Инструкция по эксплуатации, Страница: 18 / 48

16
B. WINDING THE BOBBIN
1. Open the top cover.
2. Place the bobbin on the bobbin winder spindle
so that the groove ( ) on the bobbin fits to the
spring ( ) on the spindle.
Push bobbin to the right to engage bobbin winder.
(LCD will indicate the bobbin winder mode.)
3. Set the felt washer ( ) to the right side of spool.
Set the spool of thread on spool pin so that the
thread unrolls from the front of the spool.
Set the spool cap ( ) on spool pin as far as it will
go.
Reverse spool cap direction according to the size
of spool.
: Large Spool : Small Spool
Use the small spool cap ( ) when you use cross
wound thread. Leave small opening between cap
and spool as illustrated ( ) for smooth thread
feeding.
4. Hold thread in both hands and hook thread to
the guide from rear opening.
Bring thread frontward and pass through the
thread guide from right to left.
5. Bring thread backward and pass through the
thread guide ( ) from left to right.
6. Bring thread to the right and pass thread through
the thread guide from rear side. Pass thread
under tension disc in counter clockwise direction.
A. REMOVING THE BOBBIN
11.5 mm
Actual Size
NOTE:
Use the bobbin dedicated to this model.
BOBBIN SETTING
1. Raise the presser foot lifter.
2. Pull the bobbin cover latch to the right and
remove the bobbin cover.
3. Lift up the bobbin from the machine.