Everlasting LoStagionatore STG ALL 700 BLACK S ADV, Инструкция по эксплуатации и техническому обслуживанию

Страница: 8 / 64

5
STAGIONATORE
- position the appliance with the help of a spirit level. Adjust the leveling feet on the metal base of
the unit if necessary (fig.3)
- remove the protective PVC film from the external surfaces of the unit
- position the shelf runners in the holes in the uprights (fig.4)
- insert the food shelves in the runners
- insert the condensate collection tray in the relevant runners located beneath the unit
3.3 WIRING AND ELECTRIC / WATER CONNECTION
The electrical plant and electrical hook-up operations must be
performed by a qualified electrician
For safety reasons adhere to the following indications:
- check that the electrical plant is suitably sized for the absor -
bed power of the unit
- if the electrical socket and the plug on the appliance power
cord are incompatible, change the plug with a suitable compo-
nent, ensuring the replacement part is of the approved type
- do not use reductions or multi-way adapters (fig.5)
It is important to connect the appliance correctly to an efficient earth system executed in com -
pliance with the relevant legislation.
Connection to the water supply
network:
All the Seasonig cabinets need to
be connected to the water supply
network to absolve the humidity
functions.The connection
to the water supply network
must be execute according to
manufacturer’s instructions and
to professional qualified personal.
The ¾ thumb connection to the
water supply network is placed in
the engine compartment, at 200
cm high from the ground. This
cabinet need to be exclusively
connected to cold water, not
distilled and demineralized. The
working pressure needs to be
between 0,1 to 0,3 MPA.
It is advisable to install a tap to
stop the water flow in case of
maintenance.
If water is a little bit tough is
recommended to install a water
softener. Any possible solid
particles, sands for example, can
be removed installing a mechanic filter that it must be periodically checked and clean.
3.4 SET-UP OPERATIONS
To avoid errors and accidents, perform a series of checks for possible damage sustained du-
ring transport, installation and hook-up operations before starting up the unit.
fig.5