Everlasting LoStagionatore STG ALL 700 BLACK S ADV, Инструкция по эксплуатации и техническому обслуживанию

Страница: 26 / 64

23
STAGIONATORE
TEMPERATURE
Allows setting the temperature to be kept inside Lo Stagionatore in this phase.
The first step is the activation or deactivation of temperature control:
In case in this phase of the recipe you wish to control the temperature inside Lo Stagionatore, it is
necessary to move the selector next to the TEMPERATURE name to the ACTIVE (green) status. Vice
versa, if in this phase you do not need to actively control the temperature, move the selector to the NOT
ACTIVE (black) status.
By clicking on the icon it is possible to go from active to not active status, and vice versa.
Then there are 3 parameters to be set:
- Set Point: it is the Temperature target to be kept inside Lo Stagionatore.
- Cold Differential: it is the higher temperature delta compared to Set Point, defining when the compres-
sor should intervene to restore the internal temperature of Lo Stagionatore to the set-up Set Point.
Default value: 2°C
- Warm Differential: it is the lower temperature delta compared to Set Point, defining when the electric
heater cables should be activated to restore the internal temperature of Lo Stagionatore to the set-up
Set Point.
Default value: 2°C
To change one of the three parameters, click on the corresponding value and type a new content on the
appearing numeric keyboard. Push
to confirm or to cancel and return to the previous values.