Everlasting LoStagionatore STG ALL 700 BLACK S ADV Скачать руководство пользователя страница 54

Страница: 54 / 64

STAGIONATORE

ATTENTION:

Make sure that the USB stick only contains the folders to be imported/exported, and

the firmware image file. In case an unsuitable USB stick is used, a forced system restore of Lo Sta-

gionatore will have to be carried out by unplugging and replugging it.

12.3.2 Info:

In this page all the hardware codes identifying the electronics on Lo Stagionatore and

the installed Firmware version are recorded.

12.3.3 Firmware Update:

They key is normally not clickable and grey-coloured. When the firmware

file on the USB stick is recognized, the key becomes light blue and can be clickable. A warning pop-up

asks the user for confirmation of the operation. Lo Stagionatore automatically reboots: do not carry

out any operation during the reboot!

Wait for the acoustic and visual signals that tell the user to remove the USB stick to complete the

process!! (fig.25)

fig.25

!!! ATTENTION:

Make sure that the USB stick only contains the folders to be imported/exported,

and the firmware image file. In case an unsuitable USB stick is used, a forced system restore of Lo

Stagionatore will have to be carried out by unplugging and replugging it.

12.3.4 Reboot:

To reboot Lo Stagionatore. A warning pop-up asks the user for confirmation of the

operation.

It is not possible to reboot if a USB stick is inserted.

12.4 PARAMETERS

This area is protected by password and is intended to authorized technical personnel only.

Содержание LoStagionatore STG ALL 700 BLACK S ADV

































































Результаты поиска

Содержание LoStagionatore STG ALL 700 BLACK S ADV

Отзывы:

Бренды по названию

Популярные бренды

Everlasting LoStagionatore STG ALL 700 BLACK S ADV, Инструкция по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание LoStagionatore STG ALL 700 BLACK S ADV

Отзывы:

Бренды по названию

Популярные бренды