8
ASSEMBLY INSTRUCTIONS
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlastsa.co.za
Everlast/SA
everlast_sa
IMPORTANT - ASSEMBLE WITH ALL NUTS AND BOLTS LOOSE AT FIRST, ONLY TIGHTEN AFTER
COMPLETING ALL ASSEMBLY STEPS. UNPACK THE BOX AND PLACE ALL PARTS ON THE FLOOR.
CAREFULLY REMOVE ALL PACKING MATERIAL AND CHECK EACH PART AGAINST THE MANUAL FIRST.
REMEMBER SOME PARTS ARE PRE-ASSEMBLED TO LARGER COMPONENTS.
NOTE: FOR SAFETY REASONS, DO NOT CUT THE PACKING BELT (F) UNTIL YOU’VE COMPLETED THE
ENTIRE ASSEMBLY PROCESS.
STEP 1
1. Lift the Left Upright Tube (A05) upwards.
2. Fix the Left Upright Tube (A05) to the Base Frame (A01). Use 1pc Bolt (D46) and 1pc Lock Washer (D64) to
attach the side. Use 1pc Bolt (D50) and 1pc Lock Washer (D64) to attach the front. Secure using Allen
Wrench (B12).
3. Repeat the above step to attach the Right Upright Tube (A06) to the Base Frame (A01).
NOTE: During assembly, support the Upright Tubes (A05 & A06) with your hand to prevent them from falling down.
A06
D64
D46
D50
D64
A05
D46
D64
D50
A01