21
Component Identification and Explanation
Number
Component Identification
Component Note
1
Protective Cover
Keep cover down and in place during welding activities and in storage.
2
Euro
-
Style Quick Connector
Connect this to the MIG gun or Spool Gun.
3
Positive Terminal (+)
DINSE 35/50 Type
For Stick, connect to the Torch. For MIG, this remains vacant. For Flux
-
Cored connect the work clamp. For
Plasma connect the work clamp.
4
Control Connector
For Plasma the torch switch wire connects here. For the Spool Gun, the control circuit wire goes here.
5
Negative Terminal (
-
)
DINSE 35/50 Type
For Stick connect to the work clamp. For MIG, connect to the work clamp. For Flux
-
Cored, this remains vacant.
For Plasma, connect to the torch.
6
Handles
Install handles with provided screws. If their use is not desired, you may leave them off and install just the
screws.
Front Panel View
4
3
1
2
5
6
