18
SELECT THE CORRECT STICK POLARITY.
Selecting the right stick polarity is simple since most all welding is
done electrode positive, regardless of rod classification or brand. The
main exception to this is that E6011 may be used electrode negative,
but in most cases it will still be used with electrode positive configu-
ration.
Setup Guide
Getting Started
Where Do I Connect The Stick Torch?
Electrode
Work Clamp
Work
DINSE 35/50
DINSE 35/50
Adapter
For most all applications, connect the electrode holder to the positive
terminal. Connect the work clamp to the negative terminal.
Electrode Holder
(Stinger)
WARNING!
Remove the stick torch while MIG welding to prevent accidental arc
striking and damage. Remove the MIG torch while stick welding for
the same reason. The stick and MIG torch terminals will remain live
despite the mode that has been selected. The power is not discon-
nected to the output terminals on the machine while welding other
processes. Do not touch exposed terminals while welding in either
Where Do I Install The Spool Gun?
Work Clamp
The spool gun connection process is similar to the MIG torch connection
and uses the same Euro Quick Connect connection. Polarity is the same as
MIG except when Flux
-
Cored wire is being used.
Spool Gun
Work
DINSE 35/50
Adapter
Euro
-
Quick
Connector
Spool Gun
Control Connector
INSTALLING THE OPTIONAL SPOOL GUN.
The Everlast SM200N
-
MTS Spoolgun is recommended for use with
this unit and provides the best duty cycle and amperage rating.