Customer Service 1-888-707-1880
Or email [email protected] Dyaco Canada Inc.© 2015
- 8 -
STEP 2
1) Slide the seat (13) with seat carriage set (8) into the rower seat track (4) which direction is
from end of seat track (4).
2) Put one bolt (123) with one stopper (22) through the two side hole of rower seat track (4)
and tighten with another stopper (22) and nut (122).
3) Put the end cap (21) into end of seat track (4).
4
13
122
22
22
123
21
8
STEP 3
1) Attach the welded bracket of rear stabilizer (5) with two end cap sets (20/98) to the bottom
screw hole of end seat track (4) and tighten with four allen head bolts (117), four spring
washers (104) and four flat washers (26).
NOTE: After finish whole product assembly, you can screw the pre-assembled level knob
(98) of rear stabilizer (5) to adjust the whole product balance.
5
26
104
117
4
98
20
