EPTZ3602/3602i
46
Note 1: The difference between the One-way tour mode and To-and-fro tour mode is that the return
modes are different. For example: There is a tour with 3 preset positions 1, 2 and 3. The camera runs
1→2→3→1→2→3 in the One
-
way tour mode, and 1→2→3→2→1 in the To
-and-fro tour mode.
Note 2: You could set a pattern tour. Press Set + Tour, and input 0, press Enter. Sway the joystick to
record the entire tour. Press Stop to stop recording tour. To view this pattern tour, simply press Tour,
and input tour number 0.
Alarm Link to a Position/Tour
EPTZ3602/EPTZ3602i have 4 alarm inputs that can be set to link to a position or a tour when an alarm is
triggered.
•
Set an alarm link:
Press F1 to set an alarm link. Enter the alarm number, and then press Enter. Switch the Joystick
up/down to select a position or a tour, enter a position or tour number, and then press Enter to
confirm the alarm link setting.
If you set the position number to 99, the dome will do a 360 degree auto scan or AB two point pan
if limit is ON. If you set the position number to 98, the dome will do a frame scan.
•
Delete an alarm link:
Press Clr + F1 to delete a link of alarm to position/tour.
Note 1: After alarm output signal is terminated, the speed dome will resume action or return to its
original position.
Note 2: After powering on the speed dome, it will detect alarm status automatically.
Other Operations
The 3602/EPTZ3602i can work with a DVR that has PTZ control functions, and a matching protocol. The
available control functions depend on different DVRs.
The 3602/EPTZ3602i can work with a keyboard that has PTZ control functions, and a matching protocol.
The available control functions depend on different keyboards.
