3-32
can set the masking size and position in the private zone setup mode.
In this mode, you can press
“Shift” + “6” to increase masking horizontal size;
“Shift” + “4” to decrease masking horizontal size;
“Shift” + “2” to increase masking vertical size;
“Shift” + “8” to decrease masking vertical size;
Shift Joystick to select the position where the masking is located.
“Enter” to confirm the size and position, and then the masking will turn into green again.
18. AUTO REGRESS
：
Auto regress to the shortest path during set a position. It can
shorten the response delay, and increase the response performance and speed dome
lifetime.
ON:
Enable the auto regress function.
OFF:
Disable the auto regress function.
19. X CNT
：
X-axis counter. This counter counts the x axis movement, and 1 is counted
when the speed dome pans 360
°
.
20. Y CNT
：
Y-axis counter. This counter counts the y axis movement, and 1 is counted
when the speed dome tilts 180
°
.
21. PO CNT
：
Position counter. This counter counts the go-position times, 1 is counted
when speed dome goes to a position once.
22. OP HR
：
Operation hour. This counter counts the operation hours.
