4-36
To-and-fro tour mode:
Press Shift + Tour to run a to-and-fro tour. The system will
ask you to enter the tour number you would like to run, and starts the tour after
pressing Enter. To preset a tour before running it is necessary.
Note:
The difference between the One-way tour mode and To-and-fro tour mode is that
the return modes are different. For example: There is a tour with 3 preset positions 1, 2
and 3. The camera runs 1
→
2
→
3
→
1
→
2
→
3 in the One-way tour mode, and 1
→
2
→
3
→
2
→
1 in the To-and-fro tour mode.
4.5. Alarm Link to a Position/Tour
EPTZ3000/EPTZ3000I have 4 alarm inputs that can be set to link to a position or a tour
when an alarm is triggered.
Set an alarm link:
Press
F1
to set an alarm link. Enter the alarm number, and then press
Enter
.
Switch the Joystick up/down to select a position or a tour, enter a position or tour
number, and then press
Enter
to confirm the alarm link setting.
Delete an alarm link:
Press
Clr
+
F1
to delete a link of alarm to position/tour.
4.6. Other operations
The EPTZ3000/EPTZ3000I can work with a DVR that has PTZ control functions,
and a matching protocol. The available control functions depend on different DVRs.
The EPTZ3000/EPTZ3000I can work with a keyboard that has PTZ control
functions, and a matching protocol. The available control functions depend on
different keyboards.
