EverFocus EMV400 Скачать руководство пользователя страница 26

Страница: 26 / 129

1.11.1

Alarm Input Contacts

This DVR provides one alarm input per camera. All inputs are programmable N.O. (Normal Open) or N.C.
(Normal Closed) Inputs have to be switched by dry contacts.

Alarm input with N.O. (Normal Open) contact

Alarm input with N.C. (Normal Closed) contact

idle

state

idle

state

All settings are programmed in the ALARM menu (Section 0).

1.11.2

Alarm Output Relay

The relay output provides either Normally Open or Normally Closed dry contacts.

Output relay in idle state

1.12

USB-Mouse installation

Connect the USB mouse to one of the 2 USB ports. (This can be done while DVR is powered on) The rear

USB V1.0 port is recommended to reserve the higher speed front USB V2.0 port for video copy/export.

NOTE: Recommended mouse types are Logitech® and Microsoft® wired USB wheel-mouse. Wireless
USB mouse is not supported.

1.13

NETWORK CONNECTION

This section only describes physical connection to an Ethernet network. This step must be completed

before the DVR can connect to the network. There are two basic types of connection:

Содержание EMV400


































































































































Результаты поиска

Содержание EMV400

Отзывы:

Бренды по названию

Популярные бренды

EverFocus EMV400, Руководство пользователя

Результаты поиска

Содержание EMV400

Отзывы:

Бренды по названию

Популярные бренды