EMV401/801/1601
3
Front Panel
1
2
3
4
6 7
8
9
5
No. Name
Description
1
USB2.0
Port
Two USB2.0 ports for connecting to the 3G USB dongle, USB storage
device or mouse.
2
Audio Out
RCA audio output for connecting to the speakers. The audio output only
works during playback.
3
Main
Monitor
RCA video output for connecting to a monitor for live view, playback and
displaying OSD.
Note this mobile DVR has two Main Monitor outputs (one on the front
panel and the other on the rear panel). All of the Main Monitor ports can
be connected simultaneously.
4
IR Receiver Receives data from the infrared remote control.
5
SD Card
(TBD)
Insert a SD card for data storage. It is currently reserved.
6
HDD Drive
Tray
Installs a 3.5” or 2.5” HDD for recording.
7
HDD Key
Lock
Locks and unlocks the HDD tray.
8
Ethernet
Port
Two RJ-45 ports for connecting to the network.
It’s recommended to use LAN 1 for connecting to the IP cameras via a
hub or switch, and use LAN 2 for WAN connection.
8
System
LEDs
•
GPS LED: Turns on when the mobile DVR is receiving the GPS data.
•
Power LED: Turns on when the power is supplied.
•
Copy LED: Turns on when the mobile DVR is archiving data to the USB
storage device.
•
HDD R/W LED: Turns on when the HDD is reading or writing.
•
System Fail LED: Turns on when these events occur: HDD Full / Fan
Fail / HD Temperature.
•
Heater LED: Turns on when the mobile DVR is overheating.
