EMV401/801/1601
7
2.2
Hard Disk Installation
The EMV401 / 801 / 1601 supply with a 3.5” HDD tray for inserting a Hard Disk for video
recordings. Please follow the steps below to install the Hard Disk.
Note:
1.
If you want to use a 2.5” HDD, make sure to use the supplied 2.5” HDD tray screws to
secure the HDD to the HDD tray.
2.
The EMV401 / 801 / 1601 does not support hot swap for the hard disk. Ensure to power
off the hybrid mobile DVR before removing the hard disk. Also ensure to remove the
hard disk only after the power was completely shut off. This would protect and extend
the operating life of the hard disk.
1.
Make sure the hybrid mobile DVR is power-off.
2.
Place the hard disk in the HDD tray, secure the HDD with the supplied HDD Screws (8 for
3.5” HDD and 6 for 2.5” HDD) on the bottom of the HDD tray.
3.
Insert the HDD tray to the hybrid mobile DVR.
