Value IP 2MP 288 Series / 3MP 368 Series
16
2.
You can wire the cables from the side of the camera or through the wall.
Wire the cables from the side of the camera
Wire the cables through the wall
3.
Place the camera’s base against the anchoring surface so that the holes line up. Screw the camera
to the wall / ceiling using the supplied
Screws
.
4.
Optionally insert a micro SD / SDHC card into the card slot. Please refer to
4.4.2 Inserting a micro SD
Card
.
5.
Connect the LAN / PoE cable to the camera.
a.
Remove the
Screw Cap
from the
Cable Gland
.
b.
Insert a RJ-45 network cable (without the RJ-45 connector on the one end) through the
Cable
Gland
and
Screw Cap
.
c.
Place the
Waterproof Ring
into the LAN / PoE cable. Connect the RJ-45 cable to the RJ-45
Connector Cable. Tightly screw the
Cable Gland
and
Screw Cap
to the RJ-45 Connector Cable.
