Value IP 2MP 288 Series / 3MP 368 Series
56
3.
Set up schedules to active the alarm functions and send alarm notification. Check the box of
the desired section to configure the schedule, and select a start / end time from the
drop-down list for the section.
4.
On the preview window, click and drag to draw the desired Motion Detect area, the area will
be marked in red.
5.
You can remove the configured Motion Detection area by clicking the
Clear
button.
6.
Set up event reactions for the Motion Detection function. Check the box of the desired
reaction (Email, Snapshot, Record or Alarm output) to link with the function.
Email:
Check the box to enable transmitting the alarm notification to the mail server. To
configure Email settings, see
7.3.2.1 Email Settings
.
Snapshot:
Check the box to enable taking snapshots to the micro SD Card when an event
occurs. You can further configure the Snapshot settings including
Snapshot Interval
and
Snapshot No.
. For example, if you set up the
Snapshot Interval
to 5 and
Snapshot No.
to 3,
system will take 3 snapshots every 5 seconds.
Record:
Check the box to enable recording to the micro SD Card when an event occurs.
Alarm Output:
Check the box to enable triggering the external alarm device.
After complete the settings, click
Save
to apply the settings.
Note:
The Snapshot and Record settings are only functional if the micro SD Card has been
inserted in the camera’s micro SD card slot.
