Everest VX Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 71

background image

NON-EVEREST COMPONENTS

Scotsman Cubers

All documentation for Scotsman Prodigy cuber is provided directly from Scotsman. If the
Scotsman unit was factory installed then any hardcopy documentation that was provided by the
manufacturer is shipped with the machine. It is in the documentation folder hanging on the
inside of the RF door of the machine. Otherwise, you can download the manufacturer’s current
support documentation at

www.scotsman-ice.com

. Relevant documents are:

● Scotsman Prodigy C630 Datasheet.pdf
● Scotsman Prodigy C1030 Datasheet.pdf
● Scotsman Prodigy C1448 Datasheet.pdf
● Scotsman Prodigy C1848 Datasheet.pdf
● Scotsman Prodigy C630, C1030, C1448 C1848 Installation & User’s Manual.pdf
● Scotsman Prodigy Series Cleaning Instructions.pdf
● Scotsman Prodigy Series Technical Service Manual.pdf

Use and Operation -

It is important to familiarize yourself with the general operation of the

control panel, functions and features of the machine. The Scotsman cuber is integrated with the
machine’s control system and is controlled by the PCB and also remotely via Akoona.net.
However, you will often control the Scotsman cuber directly from the unit's control panel.

Cleaning, Sanitizing, and Maintenance -

The unit must be maintained on a strict periodic

cleaning and maintenance schedule or it will break down. Follow the Scotsman cleaning and
sanitizing procedure exactly precisely on schedule.

Adjusting the Ice Bridge Thickness -

The ice bridge thickness is important in general to

produce good quality ice and it is even more important when dispensing ice using the Everest
machine. The ice bridge thickness should be monitored periodically and adjusted.

Assistance with Scotsman Cuber -

For all technical issues with your Scotsman cuber visit

https://www.scotsman-ice.com/service-support/

or call their technical service line directly by

calling 1-800-533-6006.

Registering Your Scotsman Ice Maker

- Register your warranty for the Scotsman Ice Maker

http://www.scotsman-ice.com/service-support/

). The only unit that needs to be registered for

warranty purposes is the Scotsman Ice Maker, for any warranty issues for the MEI units,
Everpure unit, or the USA technology units, please contact Everest at
[email protected]

63

Vb000122015

«
...
62
63
64
65
66
...
»

Содержание VX








































































Отзывы:

Нет отзывов

Похожие инструкции для VX

Бренд: Duerkopp Adler Страницы: 24

Бренд: Singer Страницы: 10

Бренд: Thomas Страницы: 24

Бренд: Viruserv Страницы: 6

High Roller Club

Бренд: IGS Страницы: 39

Denim Pro BL 18

Бренд: Baby Lock Страницы: 22

Бренд: JUKI Страницы: 9

Бренд: SunStar Страницы: 24

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 20

Бренд: Philips Страницы: 36

Бренд: Philips Страницы: 38

Бренд: Philips Страницы: 40

Бренд: Philips Страницы: 36

Бренд: Philips Страницы: 40

Бренд: Philips Страницы: 48

magic 3 voice dect

Бренд: Philips Страницы: 48

Бренд: Philips Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды