22
Door Reversal Instructions
Some products have field reversible doors to accommodate specific kitchen layouts. Door
reversals must be performed by qualified technicians. A second person is required. Safety
goggles must be worn to protect from spinning parts. Warranty is void if the following
guidelines are not met.
5.
Extra precaution must be taken for the following steps. Release the door tension from the door spring by
inserting a sharp pointed implement into one of the door hinge shaft’s unoccupied tension lock screws
C- 2
.
6.
Slowly turn the door spring shaft clockwise until you are able to unscrew the tension lock screw
C- 2
. Remove
the tension lock screw.
7.
Slowly take out the sharp pointed implement inserted into one of the spring shaft’s unoccupied tension lock
screw holes. When the rigid object clears the hole, the door spring will release the stored tension and the
door spring shaft will spin rapidly.
8.
Follow steps
4
through 7 for the bottom door shaft.
9.
A second person is required to secure the door against the unit while the top hinge is removed
E
.
10.
Detach the top hinge by removing the 3 screws holding it in place
C
.
11.
Lift the door until it detaches from the bottom hinge
D
. Ensure that the top and bottom springs and shafts
remain in the door cavity.
12.
Detach the bottom hinge by removing the 3 screws holding it in place
C
. Detach the bottom hinge.
13.
The right top hinge becomes the left bottom hinge
C
. Install the right top hinge into the left bottom position
using 3 screws. Ensure that the door hinge pins are facing up.
14.
Flip the door so that the hinged corners are on the left side when facing the door
E
.
15.
Mount the door on the bottom door hinge
C
. The longer of the two pins pointing upward should be
inserted into the bottom spring shaft.
16.
A second person is required to secure and hold the door against the unit while the top hinge is installed
E
17.
T he bottom right hinge becomes the left top hinge
D
. Install the left top hinge on the door. The two pins on
the door hinge should be facing down and the longer of the two inserted into the top door spring shaft.
18.
Secure the top hinge to the unit using 3 screws. Ensure that the door is properly secured to the frame.
19.
Sufficient tension must be added to the door springs so that it self-closes. Insert 2 sharp pointed
implements into the vacant tension lock screw holes
C- 1
D- 1
and turn the shaft counterclockwise.
2 to 3 rotations should provide sufficient tension.
20.
Test the door for proper operation.
Door Reversal Instructions (Continued)
