20
02002167 Revision A, February 2005 • Metro IC3 Owner’s Manual
adjust calf pad position,
elevating legrest
(footplate extension
not shown)
calf pad
hinge plate slot
legrest tube stop
legrest tube
legrest calf
pad / hinge
plate assembly
Adjust elevating legrest calf pad position
The legrest calf pad has three mounting positions one inch apart on
legrest tube. Refer to picture at right. To adjust:
1. Rotate calf pad/
hinge plate assem-
bly on legrest tube
so that legrest tube
stop is in center of
hinge plate slot.
2. Slide calf pad /
hinge plate assem-
bly up or down on
legrest tube to
desired position.
3. Rotate calf pad /
hinge plate assem-
bly on legrest tube
so that legrest tube
stop is aligned in
desired position.
CROSSBRACES
Tighten crossbraces
M13 wrench, M6 hex key
Check the crossbraces to ensure that the bolt and nut securing both
crossbraces in the center of the wheelchair are secure (crossbraces
should be loose enough to fold easily, yet snug enough to take up
excess play). Use a M13 wrench and M6 hex key to tighten.
