21
02002167 Revision A, February 2005 • Metro IC3 Owner’s Manual
right rear wheel
wheel lock
shown unlocked
right front frame
wheel lock
WHEEL LOCKS
Adjust wheel locks
One 7/16" wrench
There are two types of wheel locks:
push (forward) to lock, pull (back) to unlock
pull (back) to lock, push (forward) to unlock
Both types are adjusted on wheelchair frame by the same method.
1. Use a 7/16" wrench to
loosen the two clamp
bolts until the lock slides
on the frame.
2. Place the wheel lock in
the locked position and
slide it into contact with
the tire.
3. Place the wheel lock in
the unlocked position
and slide it 3/8" closer to
the tire.
4. Use a 7/16" wrench to tighten the two clamp bolts and engage the
lock to check the fit. The lock should indent the tire at least 3/8".
Tighten clamp bolts securely to eliminate wheel lock movement on
frame.
