23
02002167 Revision A, February 2005 • Metro IC3 Owner’s Manual
anti-tipper
tube
roller
tube
roller tube
securing screw
roller
adjust roller,
anti-tipper
Adjust anti-tipper roller position
3/8" wrench, Phillips Screwdriver
Adjust the anti-tipper roller position if the anti-tippers are too close to
or too far from the ground.
1. Use a 3/8" wrench and a
Phillips screwdriver to remove
the screw that secures the
roller tube to the anti-tipper
tube (see picture at right).
2. Mount roller tube on anti-
tipper tube in other position.
3. Reinstall screw that secures roller tube to anti-tipper tube: Use a
3/8" wrench and a Phillips screwdriver to tighten. Ensure that roller
tube is well-secured to anti-tipper tube before using wheelchair.
4. Perform Steps 1-3 for other anti-tipper. Ensure that anti-tippers are
in identical positions.
