6
IV. Functions
When the refrigerator system is connected to the power supply for the first time, all icons on the display panel gets
illuminated for 3s.
1. Functions
1.1 Temp. setting
“SET” is the key to set temperature mode. Every time when this key is pressed, the current indicator light will be off, with
the next indicator light illuminated; and when the door is closed, the temperature mode setup will be validated. Once the
setting takes effect, the temperature will be controlled accordingly, with the corresponding indicator light normally ON.
The temperature setting progresses through the following cycle: 1→2→3→4→5→1→2→3→4→5.
If your refrigertor is installed in too low or high temperature, the internal cooling system may not work correctly.
1.2 Power Off
1
）
After the “Power Off” function of the refrigerator is enabled, the mode indicator lights "2" and "3" will be on. When the
refrigerator is at “Power Off” state, the lighting lamp will be off, with no cooling and defrosting action to be performed.
Users can set this function when they are on holiday for a short time.
Before setting this function, be sure to take out all the items in the refrigerator!
2
）
To enable the “Power Off” function:
Press and hold down the ‘SET’ button for 10s.
3
）
To exit the “Power Off” function:
When the ‘Power Off’ function is active, press and hold down the ‘SET’ button for 10s.
