5
3.
Level ground
Place the refrigerator on the solid and flat ground (floor) to keep it stable, or else, it will give rise to vibration and noise.
When the refrigerator is placed on such flooring materials as carpet, straw mat, polyvinyl chloride, the solid backing plates
should be applied underneath the unit, so as to prevent color change due to heat dissipation.
4. Fixing the refrigerator to the closet
The user can install the screw into the holes on the inner cabinet to fix the refrigerator to the RV closet, pls see below
photos:
5. Fixing the glass shelves in the refrigerator room and freezer room
The glass shelves in the refrigerator room and freezer room will be fixed in the production. For the safety consideration,
the glass shelves are prohibited to move.
Unobstructed ventilation shall be maintained around the unit or in an embedded structure.
Preparations for use
1.
Standing time
After the refrigerator is properly installed and well cleaned, do not switch it on immediately. Make sure to energize the
refrigerator after more than 1 hour's standing, so as to ensure its normal operation.
2.
Cleaning
Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth.
3.
Power-on
Connect the refrigerator power supply to the dedicated power supply battery in the RV, then the compressor starts
working. After 1 hour, open the freezer door, if the compartment internal temperature drops significantly, it indicates the
refrigeration system is working normally.
4.
Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be automatically controlled
according to the user's temperature setting. After the refrigerator is fully cooled, put in foods, which usually need 2~3
hours to be fully cooled. In summer, when the temperature is high, it takes more than 4 hours for the foods to be fully
cooled (Try to open the refrigerator door as less as possible before the internal temperature cools down).
When used in an ambient temperature of higher than 50
℃
, in order to guarantee the service life and
function of the electronic components of the refrigerator, it may not get started at the first time or not be cooling.
