7
HOMEDEPOT.COM
Operation
1
Connecting power and testing
pump operation
2
Operating the pump
NOTE
: When these pumps are installed in a basin with a
sealed cover, switch operation cannot be observed. The sump
cover usually will have a spare that is plugged with a rubber
plug. This plug can be removed and switch operation can be
observed.
□
Plug the pump power cord plug into a 115V GFCI power
outlet.
□
Run water into the pump until the pump starts. Ensure the
gate valve in the discharge line is open.
□
Allow the pump to operate through several on/off cycles.
□
When the float switch (1) moves up over the top of the
pump, the pump begins to operate. When the water lowers
to a certain level, the float switch (1) will turn the pump off.
NOTE
: Ensure the pump is submerged in water. Running the
pump dry can damage the pump.
1
Please contact 1-844-883-1872 for further assistance.
