Ever EASYLINE AVR USB Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 24

Ever EASYLINE AVR USB Скачать руководство пользователя страница 19

EVER EASYLINE AVR USB UPS Range Operating Manual

19

www.ever.eu

Technical Service, tel.: +48 61 6500 400

2017-01-27 12:25

Type 02

COLD START

The cold start function allows to start the UPS when it is disconnected from the

mains. To do this, push the button on the front panel to switch the UPS on. The

battery operation mode is active, signaled by a sound. Next, battery operation of the

UPS is signaled by an intermittent sound, generated every 10 seconds, and by the

active

icon.

SAFEGUARDS

Overload protection

In the mains operation mode, at the load over 110% of the nominal power, the UPS

indicates the overload condition by a rapid intermittent sound (every half second) and

a flashing icon

. If this condition persists, the UPS will automatically switch off.

The higher the load, the sooner the UPS will switch off. In the back-up mode, an

overload causes the UPS to shut down immediately.

Short-circuit protection

Short-circuit protection on the input side is provided by an automatic mains

protection. For battery operation mode, there is an electronic protection of the UPS

output, the operation of which is signaled by active icon

and a continuous

sound signal. If there is a short circuit, voltage from outlet sockets is disconnected

and the UPS remains in the signaling mode. Switch the UPS off with the button on

the front panel. Switching the UPS on again is possible only after user intervention

(elimination of the short circuit and switching the UPS on with the button).

COMMUNICATION WITH PC

EASYLINE AVR USB

UPS units are equipped with a USB port enabling

communication of the UPS with a PC. The device is supplied with a USB

communication cable. In order to ensure proper communication of the device with a

PC, the monitoring and control software must be installed first, and then the UPS

must be connected to a free USB port on your PC, with the supplied USB

communication cable. For Windows operating systems, default drivers for HID

(Human Input Device) are installed. Current software and installation procedures can

be downloaded from

www.ever.eu

.

«
...
17
18
19
20
21
...
»

Содержание EASYLINE AVR USB

























Отзывы:

Нет отзывов