Ever EASYLINE AVR USB, Инструкция по эксплуатации, Страница: 17 / 24

EVER EASYLINE AVR USB UPS Range Operating Manual
17 www.ever.eu Technical Service, tel.: +48 61 6500 400
2017-01-27 12:25 Type 02

connect the devices you want to power (e.g. a PC with a monitor) to the UPS
unit's output sockets,

switch the UPS on with the button on the front panel,

switch the devices connected to the UPS on,

install the software on the main PC,

when prompted by PowerSoft's installer, connect the UPS to the PC with a USB
cable.
Once this is done, the UPS is ready to operate.
CAUTION! The batteries reach their full capacity after approximately a
month of mains operation mode.
CAUTION! For maximum battery performance is recommended by three
times their formation discharge power supply load of approximately 100
W and re-charge power supply.
DESCRIPTION OF OPERATION OF THE UPS
GENERAL INFORMATION
The main aim of the UPS is supplying electric power to appliances connected to its
outlet sockets. The energy is supplied from the battery if the level of the input voltage
or its frequency exceeds the top or bottom threshold values or a lack of mains power
is detected. The time of supplying power from the battery depends on the battery
capacity and the power consumed by appliances that are currently connected to
outlet sockets (load level).
The EASYLINE AVR USB UPS unit is a modern electronic device, an autonomous
source of ~230 V sine voltage in case of emergency. The device is an uninterruptible
line-interactive (VI) class power supply unit that comprises units synchronized with
the mains. The unit's Automatic Voltage Regulation (AVR) system corrects the
drops and peaks in the mains to ensure the receivers are supplied with voltage with
correct parameters, without using the power stored in the battery.