manualshive.com logo in svg

Ever EASYLINE AVR USB, Инструкция по эксплуатации, Страница: 18 / 24

Поделиться
Скачать
Ever EASYLINE AVR USB Скачать руководство пользователя страница 18

EVER EASYLINE AVR USB UPS Range Operating Manual 

Type 02

 

2017-01-27 12:25

 

Technical Service, tel.: +48 61 6500 400 

www.ever.eu 

18 

 

MAINS MODE (NORMAL) 

Connecting  the  UPS  to  the  mains  does  not  mean  voltage  is  present  on  the  UPS's 

output sockets. The unit is only started when the switch button on the front panel is 

pressed.  When  the  UPS  is  switched  on,  a  sound  signal  will  be  heard  and  the 

message 

  will  be  displayed  on  the  LCD.  If  the  mains  voltage  is 

incorrect  (voltage  is  too  low  or  too  high,  frequency  is  out  of  range),  the  UPS  will 

switch  to  back-up  mode,  which  will  be  indicated  by  the  message 

  (BACK-UP 

MODE) and a sound signal will be heard every 10 seconds. 

When the UPS unit is in the mains mode, the power in the output sockets is filtered 

and,  if  needed,  raised  or  lowered  by  the  AVR  system.  The  LCD  panel  displays  the 

load,  the  battery  level,  the  mains  mode  icon  and  the  values of  the  input  and  output 

voltage. 

BACK-UP MODE (BATTERY OPERATION) 

When the UPS is in the normal (mains) mode and the voltage drops or its parameters 

deteriorate  (voltage  or  frequency  parameters  are  out  of  range),  the  UPS  will 

automatically  switch  to  back-up  mode.  This  is  signaled  by  an  intermittent  sound 

signal  (every  10  seconds)  and  an  activated  icon 

  (MAINS  MODE  icon  will 

disappear).  

If  the  battery  charge  level  is  low,  an  alarm sound  is  generated  every  second.  Once 

the  battery  is  discharged,  the  UPS  will  switch  off  and  the  receivers  will  not  be 

supplied with power. When the supply voltage is back, the UPS will restart.  

When the UPS is in back-up (battery) mode and there are no receivers connected or 

power consumption is below the threshold value (40 W in the model EASYLINE 650 

and  50  W  model  EASYLINE  850),  the  UPS  will  automatically  switch  off  after  60 

minutes in order to protect the battery before over-discharge them. This function can 

not be deactivated. 

STANDBY MODE 

The UPS will switch to STANDBY mode when the battery is completely discharged or 

when  this  mode  is  initiated  by  the  managing  software.  The  UPS  will  wait  until  the 

mains parameters are correct again and will then switch back to the mains mode.  

Содержание EASYLINE AVR USB

























Отзывы:

Нет отзывов