The Harmonizer
®
Programmer’s Manual
©
1999-2008 Eventide, Inc.
Page 93 of 97
Release 1.3
•
Go back to the basic Patch Editor area by pressing the
<done>
SOFT KEY
. Now
<insert>
an
easytaps
module.
•
Return to the
PARAMETER
area and observe that there is
now a second
SOFT KEY
. This
SOFT KEY
is stacked because
the easytaps’ parameters take up more than one menu page.
•
Go back to the Patch Editor and use the
<modify>
SOFT
KEY
on the
head
module. Note there are now three
userobject
s connected to the
head
module and that the
new
userobject
was connected after the existing two
userobject
s.
Adding a menupage module
This section demonstrates how an empty menu page shows up
in the
PARAMETER
area with a
SOFT KEY
.
•
<insert>
a
menupage
module (from the “
Interface
”
group).
•
Use the
<modify>
SOFT KEY
on the
head
module and
change the
obj1
specifier
to
menupage-obj
.
•
Return to the
PARAMETER
area and observe that the
menupage
module has created a new menu page and that
the
allpass
and
easytaps
’
SOFT KEYS
were bumped
over when the null
userobject
was replaced.
S
TACKED
M
ENU
P
AGES
This section goes through a tutorial to show:
•
That modules’ parameters are presented on a menu page when their
userobject
outputs are connected
to a
menupage
module
(which is in turn connected to the head module)
.
•
That multiple connections of the same module’s
userobject
output creates multiple “images” of the
module’s parameter(s).
Note: The second image of a module’s parameter(s) on the same menu page may not be
active.
•
That
menupage
modules’
userobject
outputs may be connected to other
menupage
modules to
create
SOFT KEY
stacks.
Inserting Multiple menupages
•
Load
Empty Program
from the “Programming” bank.
•
Go to the Patch Editor area by pressing and holding the
PARAMETER
key.
•
Select
misc
display mode by pressing the
<aud only>
key three times.
•
<insert>
a
menupage
module from the interface group.
Содержание H7600
Страница 2: ...This page intentionally left blank ...