45
For
w
ar
d-
facing
buckle
storage
2570xxxx 12/14
Para instrucciones en Español,
llamar al: 1-800-233-5921.
Symphony
™
All-in-One
Child Restraint System
Owner’s Manual
Keep for future use.
WARNING:
To reduce the risk of serious injury
or death, read this owner’s manual prior
to installing and using this child restraint.
© 20XX Evenflo Company, Inc.
2.3 to 18 kg
(5 to 40 lbs)
48 to 102 cm
(19 to 40 in.)
Rear-facing
10 to 29.4 kg
(22 to 65 lbs)
71 to 127 cm
(28 to 50 in.)
Forward-facing
18 to 49.8 kg
(40 to 110 lbs)
112 to 145 cm
(44 to 57 in.)
Booster
IMPORTANT:
• If you are using Lower Anchor Connectors to secure
the child restraint,
DO NOT
use the vehicle seat belt.
• Before installing this child restraint forward-facing with
the vehicle seat belt, you
MUST
move the Lower Anchor
Connector Assembly to the rear-facing belt path so
that it does not interfere with the vehicle seat belt. Refer
to pages 25-26 for instructions on moving the Lower
Anchor Connectors to the rear-facing belt path.
• Make sure the Lower Anchor Connectors are attached
to the storage D-rings on the seat pad.
• Check your vehicle owner’s manual to determine how
to lock your seat belt for child restraint installation.
The
seat belt must be locked to properly secure the child
restraint.
Tether Strap
Installation with Seat Belts
1. Disconnect the tether
hook from the back of the
child restraint.
2. Place the child restraint
in position.
Make sure child restraint
is in Recline Position #2
or #3 (p. 62).
Set child restraint on
the vehicle seat in
the
forward-facing
position, as shown. Lay
the tether strap over
the back of the vehicle seat.
IMPORTANT:
NEVER
use Recline Position #1 for
forward- facing AND
NEVER
use Recline Position #2
with children who weigh more than 18 kg (40 lbs).
