25
R
ear
-f
acing
To install this child restraint properly in the rear-facing
position, the Lower Anchor Connector Assembly
MUST
be in the rear-facing belt path. If the Lower Anchor
Connector Assembly is in the forward-facing belt path,
use the following procedures to move it to the rear-
facing belt path.
To access the Lower Anchor Connector Assembly, you
will first need to:
• Loosen internal harness straps (p. 58);
• Disconnect Lower Anchor Connectors (p. 20-22);
• Remove the seat pad (p. 62).
Moving Lower Anchor Connectors to the
Rear-facing Belt Path
1. Remove Lower Anchor
Connectors from the
forward-facing belt path.
Reach through the
harness straps and
remove each Lower
Anchor Connector, one at
a time.
2. Place each Lower Anchor
Connector in the rear-
facing belt path.
IMPORTANT:
Make
sure the Lower Anchor
Connector Assembly
does not interfere with the
internal harness straps.