11
Hold the combination lap/shoulder belts together just
behind the free sliding buckle tongue
E
and unbuckle the
seat belt.
Thread both straps of the seat belt into the locking clip, and
slide into place.
No more than
1/2” (13 mm)
Re-buckle the seat belt
F
, and re-check for tightness.
➚
➚
4
5
6
F
E
10
Remove the locking clip
A
from either the slot on the bot-
tom of your carrier or in your carrier base (see pages 7-8).
Thread the seat belt through the base openings for the
vehicle belt path
B
, and buckle the seat belt.
A
Use the locking clip with lap/shoulder vehicle seat belts that
have a free sliding buckle tongue or with shoulder belts
that slip through the buckle tongue and loosen when the
child restraint is checked for tightness. See pages 18 – 21 to
complete installation of this carrier and its base.
Pull the shoulder belt
C
tightly to remove all slack from the
lap portion
D
of the belt.
➚
C
Using the Locking Clip
1
2
3
T
ip
!
Push down
on the base using
your foot or
knee.
T
ip
!
B
D
