Evenflo embrace 35/pro Скачать руководство пользователя страница 31

Страница: 31 / 62

Installation Checklist –

WITHOUT

the Convenience Base

1. Place the child in the carrier.

The child’s back and bottom are flat against
the back and bottom surfaces of the carrier.

Top of child’s head is at least 25 mm (1 inch)
below the top of the child restraint seat back.

2. Secure child to the carrier.

Refer to p. 33.

Harness straps are at, or below, shoulder
level (p. 36).

Both buckle tongues are fastened (p. 33).

Chest clip is connected and positioned at
armpit level (p. 34).

Harness straps are snug against the child and you
should not be able to pinch the harness
(p. 34).

Crotch strap is snug against the child, but

NOT

under the child’s bottom (p. 38).

3. Secure child restraint to the vehicle

seat.

Carrier is securely installed with vehicle seat
belt (p. 30).

The shoulder strap portion of the seat belt is
lying across the vehicle seat back, (p. 31).

Locking clip is installed, if necessary (p. 41).

The level line is level with ground (p. 30).

The handle is in

Position 1

(Canadian

U.S.

models) or

Position 4

(U.S. models

ONLY

) (p. 32).

(

Position 4

shown at left.)

If necessary, a towel/small blanket is rolled up
and placed beneath the front edge of the carrier
so the child’s head lies back comfortably (p. 32).

4. Check your work.

To properly protect your child, the carrier

MUST

NOT

move more than 25 mm (1 inch) from

side-to-side or from front-to-back

at the vehicle

belt path

Installation Checklist

All manuals and user guides at all-guides.com

all-guides.com

Содержание embrace 35/pro































































Результаты поиска

Содержание embrace 35/pro

Отзывы:

Похожие инструкции для embrace 35/pro

Бренды по названию

Популярные бренды

Evenflo embrace 35/pro, Руководство пользователя

Результаты поиска

Содержание embrace 35/pro

Отзывы:

Похожие инструкции для embrace 35/pro

Бренды по названию

Популярные бренды