Evenflo embrace 35/pro Скачать руководство пользователя

Страница: 41 / 62

Loosen the harness
straps (p. 35) and move
the strap

out of the

way.

Insert the crotch strap
anchor

into the slot

that is the

closest

to the

child

AND

the

most

comfortable

for the

child.

Remove the crotch strap anchor

from its position

on the bottom of the carrier, and push the anchor up

through the slot to the top of the seat.

Make sure the anchor is completely through and

is lying flat against the bottom of the seat. Pull up on

the crotch strap to make sure it is securely fastened.

For newborn position, place the anchor

through the rear slot, then feed

it through the middle slot.

Make sure the anchor is

completely through the middle

slot and is lying flat against the bottom of the seat.

NEVER

use this position for children weighing

more than 3.6 kg (8 lbs).

All manuals and user guides at all-guides.com

all-guides.com

Содержание embrace 35/pro































































Результаты поиска

Содержание embrace 35/pro

Отзывы:

Похожие инструкции для embrace 35/pro

Бренды по названию

Популярные бренды

Evenflo embrace 35/pro, Руководство пользователя

Результаты поиска

Содержание embrace 35/pro

Отзывы:

Похожие инструкции для embrace 35/pro

Бренды по названию

Популярные бренды