10
• To clean pad, slide the elastic loops/plastic clips
of the seat pad off of the seat shell. Remove the
harness system. See “Changing the Harness
Position” on page 36 to ensure proper reinstallation
of harness straps.
• Machine wash cloth pad, body pillow, head support
and boot (available on some models) separately in
cold water, delicate cycle, and tumble dry 10 – 15
minutes, low heat.
• Wipe straps, buckles, canopy, and harness adjuster
with warm damp cloth and mild soap. Air dry.
• To help protect the vehicle upholstery, place a
towel beneath and behind the child restraint.
Care and Cleaning
When used with the internal harness and
properly installed pursuant to these instructions
,
this restraint is certified for use only in
passenger and multi-purpose passenger
motor vehicles, buses, and trucks
equipped with Type I or II seat
belts and in aircraft.
Airplane installation is the same
as Type I vehicle installation.
Motor Vehicle/Aircraft Usage
Check with
your airline before
departure to make sure
this restraint meets
their requirements.
T
ip
!
T
ip
!
Refer to pages 46 to 52 for instructions on installing your
child restraint in aircraft.
• Child restraints could be recalled for safety reasons.
You must register this restraint to be reached in a
public notice. Send your name, address, the re-
straint’s model number, and manufacturing date to
Evenflo Company, Inc.
1801 Commerce Dr.
Piqua, OH 45356
or call
1-937-773-3971
or register on-line at
www.evenflo.com/registercarseatcanada
• For public notice information, call Transport Canada
at 1-800-333-0510 or go to
www.tc.gc.ca
Public Notice for Canadian Customers
All manuals and user guides at all-guides.com