Eve Audio SC3070, Руководство по эксплуатации продукта, Страница: 17 / 24

EVE Audio product manual
Multichannel Setup (5.1)
17
POSITIONING
4.4. Stereo Setup + Subwoofer (2.1)
In such a setup, the subwoofer is fed by the stereo signal source. The
subwoofer filters the low frequency components of the stereo channels
and sums them to produce a mono signal, which it then reproduces. The
high frequencies are forwarded to the full-range satellite speakers.
Ideally, such a system would comprise two EVE Audio SC3070 monitors
plus one EVE Audio TS110 or TS112 subwoofer, or even two TS108
subwoofers. All these subwoofers allow you to set the crossover frequency
for the satellite speakers and the subwoofer.
60°
60°
Stereo Setup (left) and Stereo Setup + Subwoofer (right)
The positioning of the two satellites should be done in the same manner as
in a stereo setup (see “Stereo Setup”).
The subwoofer should be placed on the ground between both satellites.
Considering that low frequencies are omnidirectional, the subwoofer does
not have to be centered exactly between the two satellites. The subwoofer
can be moved back a bit so that it is at the same distance from the listening
position as the satellites. This guarantees all transducers are aligned in time.
4.5. Multichannel Setup (5.1)
The most common 5.1 systems consist of three front channels (left, right
and center), two surround channels (left/right) and a subwoofer for the
low frequencies. The speakers from a circle around the listening position.
Ideally, a 5.1 system would comprise four EVE Audio SC3070, one EVE Audio
SC407 as the center speaker plus an EVE Audio TS110 or TS112 subwoofer.
The positioning of the two front speakers and the subwoofer should be