Eve Audio SC3070, Руководство по эксплуатации продукта, Страница: 11 / 24

EVE Audio product manual
Mid Filter
11
OPERATION
If the low frequencies are boosted by the room, you can attenuate them
with the Low-Shelf Filter. The reasons for this boost could be the room
modes or the loudspeakers being too close to the walls. In the same way,
if the low frequencies are too weak, you can boost them to balance the
frequency response.
3.10. High Filter
0
+5
+3
-5
-3
100 1k 10k
dB
Hz
The High-Shelf Filter allows you to boost or attenuate frequencies above
3kHz in 0.5dB steps. High frequencies are affected depending on the
distance from the sound source to the listening position. The further you
are from the loudspeakers, the weaker the high frequencies. In such cases
the filter should be set to boost them. In desktop applications, distances
can be as short as 1m (3ft), which results in the high frequencies being
boosted. To compensate for this effect you should use the High-Shelf Filter
to attenuate the high frequencies.
If you have a very dead room, it might be wise to boost the high frequencies
in order to have a more balanced overall sound. When the listening position
is too close to the loudspeakers or the room has reflective surfaces, it is
reasonable to attenuate the high frequencies.
3.11. Mid Filter
0
+5
+3
-5
-3
100 1k 10k
dB
Hz