Eve Audio SC3070, Руководство по эксплуатации продукта, Страница: 14 / 24

SC 3070
Power Connector (IEC)
14 OPERATION
3.16. DIP Switches
On the rear panel of your EVE Audio monitors you will find three DIP
Switches. These allow you to secure your loudspeaker settings to prevent
them from being changed inadvertently.
•
Volume
When set to “lock,” this DIP Switch secures the current volume setting. The
LED ring on the front panel indicates the volume setting, but it cannot be
modified. When set to “variable,” the volume setting can be changed by
simply turning the knob.
• Filter
When set to “lock,” this DIP Switch secures the current filter settings. The
filter settings can be read on the LED ring, but they cannot be modified.
When set to “variable,” the filters can be modified freely.
•
Max. Input
This DIP Switch determines the input sensitivity of the SC3070. In a
studio environment, the reference level (0dB) ought to be 4dBu. In such
environments, leave the setting at “+7dBu.” However, some studio gear
allow much higher output levels. If it were impossible to reduce the output
level of such devices, set the switch to “+22dBu.”
The “+7dBu” setting ought to be suitable for most situations.
3.17. Mains Voltage Selector
The Mains Voltage Selector allows you to adjust the operating voltage of
your EVE Audio monitors to the local power grid. Set it to “230” if your local
power grid is 220-240 volts or “115” if it is 110-120 volts.
If you change the mains voltage value you also have to replace the fuse of
the IEC connector with an appropriate one. The corresponding fuse values
are printed on the unit underneath the IEC connector.
3.18. Power Connector (IEC)
Use the power cord supplied to connect your EVE Audio monitors to the
power grid. The IEC connector includes an integrated fuse. If your EVE
Audio monitors stop working and the fuse seems to be the problem,
proceed as follows:
• Turn the loudspeaker off.
• Disconnect it from the power grid.
• Detach the IEC connector from the unit.