Evco RICS 4.30, Руководство пользователя

Страница: 58 / 104

46 RICS
Messenger configuration page
Sending sub-page (see Screenshot 9)
• Enable: activates the e-mail module
• Send periodically/ Enable: activates the automatic sending function
• Send periodically /Interval OK: decides how often e-mail will be sent if all is functioning normally
• Send periodically /Interval Alarm: decides how frequently e-mails will be sent in the event of an alarm
• On Event\E-mail on alarm: allows the user to enable the immediate sending function if there is an alarm.
If this checkbox is selected then for each single device you can set the sending of an e-mail in the event of an
alarm (see Chapter 11)
• Advanced/Minimum time: used to avoid too frequent sending of e-mail in the event of an alarm by setting
a minimum interval between one e-mail and the next
• Advanced/Auto-retry: specifies the number of automatic sending attempts in the event of an error (busy
line, no connection, etc…)
• Advanced/SMS compatible: if this checkbox is selected then a very simple e-mail can be sent that is
compatible with SMS Text Messages format, and can be send to the addressee as such.
Settings sub-page (see Screenshot 9.1)
• Server/ SMTP Host address: specifies the address of the mail server used to send e-mail. If you have a
programme such as MS Outlook, MS Outlook express or Messenger already configured for sending e-mail
then you can copy this data from the given settings. If you are not sure of this data then contact your e-mail
provider
• Server/User name: this is the username connected to the user’s e-mail profile used to send mail
• Server/User password: this is the password for the user’s e-mail profile used to send mail
• Identification/From address (E-mail): specifies the e-mail address that will appear as the sender of the e-
mail that is sent
• Identification/E-Mail from: this specifies the name of the RICS station that sends the message. This will
appear in the e-mail header and allows the recipient to immediately understand which station has sent the
message
• Internet\RAS name: specifies the name of the Windows RAS connection (Remote Access Service) that
RICS uses to access the Internet, should there not be a permanent connection. Generally this is called
ricsInternet. To create a connection go to the Windows Control Panel
• Internet/Serial port: this specifies the COM Port used for the RAS connection. It must be specified if the
line is shared for Fax and Internet access.
Screenshot 9.1: Configure Messenger for e-mail page – Settings sub-page.